Musical Fidelity M6si integroitu vahvistin
Valmistajan myydyin integroitu vahvistin nyt kampanjahinnoiteltuna.
M6si on Musical Fidelity -vahvistin joka tarjoilee vahvaa realismia ja tunnetta. Vaikeiden kaiutinkuormien paras musikaalinen ystävä arvostetulla dual mono -rakenteella.
Tarjousvahvistinta saatavana enää vain mustana.
Musical Fidelity:n uusi M6si integroitu vahvistin on uudistettu versio poistuneesta M6i mallista tarjoten enemmän liitäntöjä sekä täysin uuden vahvistinosan. Vahvistin on entistäkin parempi niin teknisessä mielessä kuin äänenlaadullisin kriteerein arvioituna.
M6si:ssä on todellinen high-end ääni. Suuren tehonsa vuoksi ääni on avoin ja pakottamattoman kuuloinen. Pääte on suunniteltu hallitsemaan vaativimpiakin kaiutinkuormia vaivattomasti. Tinkimättömän teknisen toteutuksensa vuoksi M6si vahvistin kuulostaa todella musikaaliselta tuottaen leveän, luonnollisen ja selkeän äänikuvan. Matalaäänirekisterit toistuvat poikkeuksellisen napakasti ja voimakkaasti.
Kaiken kaikkiaan Musical Fidelity M6si tarjoaa todellista high-end -äänenlaatua, runsaat liitännät, tyylikkään muotoilun sekä luotettavuutta - kaikki kohtuullisella hinnalla.
Lataa TÄSTÄ vahvistimen datalehti
Tekniset tiedot:
Suorituskyky
- Teho: 220 wattia per kanava 8 ohm.
- THD (+kohina): <0,007% typiclal 20Hz - 20 kHz
- Signaali-kohina-suhde:> 107dB 'A'-painotettuna
- Taajuusvaste: +0, -0.1dB, 10Hz to 20kHz
Tulot
- 4x RCA/Phono linjaliitännät
- 1x XLR linjaliitännät
- USB-tulo - tyypin "B" socket (24 bit 96 kHz USB äänivirta)
Levysoitinvalitsin
- Herkkyys: 3mV nimellinen (MM), 0.4mV nimellinen (MC)
- Signaali/kohina-suhde:> 84 dB 'A'-painotettuna
- Tuloimpedanssi: 47k ohmia (MM ja MC)
- Taajuusalue: RIAA / IEC ± 0,5 dB 20Hz to 20kHz
Yleiset
- Mitat (L x K x S): 440 x 125 x 400 mm
- Paino (ilman pakkausta / pakattuna): 16,6 kg / 21,3 kg
Viimeistely: musta
At Musical Fidelity we think of the M6si as being a destination product. The M6si offers such excellent performance, facilities and power that unless you are seeking the most exotic high-end sound quality you would never need another amplifier. We believe it’s that good.
Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework.
The M6si has 220wpc. It has very low distortion, outstanding noise ratio and extremely flat frequency response. Its inputs are phono (MM/MC), 4 line level, 1 balanced XLR and 1 USB ‘B’ up to 24bit 96kHz asynchronous.
The M6 combination of high power, high current and extraordinary stability means that it can drive any loudspeaker with ease.
In use it is hard to hear any practical difference between the M6si and other much more expensive amplifiers. In proper blind listening comparisons, the M6si performs incredibly well. If we sound rather enthusiastic it’s because we are.
We love the M6si and hope that you do too.
M6si In Brief
Amplifier
- High-end circuitry from our TITAN amplifier Excellent technical performance
- Amazing load driving ability, unconditional stability will drive any loudspeaker
- Fully discrete transistor based Class A/B power amp design
- Two independent monoblocs with a separate preamp
- Drives power hungry speakers with ease and gracefully manages low impedance dips
- 220W/8 Ohm & 380W/4 Ohm output power
- Extreme power reserves for proper peak power delivery and wide dynamic range
- HT-input: bypassed preamp-stage allows connecting home-theater processors to use your M6si as ultimate L/R channel amp
Preamplifier
- Low noise design for best THD and signal integrity at low as well as high levels
- High quality Burr-Brown stepped attenuator for better channel matching than conventional potentiometer designs
- Pre Out for bi-amping with M6sPRX or active subwoofer connection
- USB input with meticulously careful digital circtuitry layout to minimize HF interference
- Phono input for turntables with MM and MC cartrdiges
Fully Discrete Power Amplifier - Son of TITAN
Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework. It features technology trickled down from our legendary 1kW TITAN power amp. And the M6 combination of high power, high current and extraordinary stability means that it can drive any loudspeaker with ease.
The Musical Fidelity Design-Philosophy
The M6si distills the true Musical Fidelity high-end expertise and design principles down into an unbeatable package in this price point. In use it is hard to hear any practical difference between the M6si and other much more expensive amplifiers. In proper blind listening comparisons, the M6si performs incredibly well. If we sound rather enthusiastic it’s because we are.
We love the M6si and hope that you do too.
Musical Fidelity stands for sound quality and robust design that lasts for decades
We INVEST our money and resources in top-tier hardware and the pursuit of optimal music reproduction.
- Robust mechanics - Discrete circuits - Huge transformers - Class A/B amps.
- No HF and RF distortion.
We aim to have the best hardware and sound quality in every price range and make true high-end affordable.
Mechanical Construction
- Uncompromising metal work in typical Musical Fidelity tradition
- Heavy front, side and top panels milled from extruded aluminium profiles
- Clean, stunning and indestructable metal exterior protects against electromagnetical interference




