X2 is an affordable and high-performance room corrector/front amplifier for automatic room and speaker optimization.
Features:
-
Connect up to 3+1 digital and analog audio sources
-
Supports stereo systems with an optional subwoofer
-
Anti-Mode™ 3 algorithm
-
USB type C connector for audio input
-
Very small size, fits anywhere
-
Plug and play: no expertise required to calibrate and use
Specifications:
- Firmware Highlights
- Anti-Mode™ 3 correction
- Cross-over for speakers and sub
- Automatic channel balance
- Tone controls
Interfaces
- Analog Stereo or 1 coaxial S/PDIF digital input (mutually exclusive)
- 1 optical S/PDIF digital input
- S/PDIF: 16 to 24 bits PCM, 32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
- USB Audio input
- USB Type-C connector
- USB Audio 1.0 Stereo 24-bit 48kHz / 96kHz PCM (no drivers required)
- Analog Stereo RCA output, analog subwoofer RCA output
- Microphone input
- IR remote control (controller included)
- Service USB port for firmware update (USB memory stick required)
Analog specifications (typical)
- Frequency Range (analog to analog): 5Hz to 22kHz
- Analog Input: 2.3 Vrms (max), SNR 100 dB, THD (-6 dB level) < 0.002 %
- Line output: 2.2 Vrms (max), SNR 107 dB, THD (-6 dB level) < 0.0015 %
- Subwoofer output: 2.3 Vrms (max), SNR 100 dB, THD (-6 dB level) < 0.03 %
- Power consumption: active 1.5W, stand-by: 0.1W
Mechanical
- Unit Weight: 0.3 kg
- Unit Dimensions: 126mm (width) x 80mm (depth, without cables) x 28mm (height)
- Measurement microphone and remote controller included
