Pro-Ject Connect It Phono E turntable cable for tonearm 5P/TAC - mXLR connectors 1.23m
5P/TAC - Mini XLR tonearm cable, TAC connector with 90 degree angle
Balanced audiophile turntable cable for tonearm with 5P/TAC - mini XLR connector. For example, for connecting Pro-Ject XA-B turntables in balanced form, the 5P/TAC connector is at a 90 degree angle.
Budget entry level audiophile interconnects.
Tin plated copper conductor & brass gold plated connectors
Our goal for the „Connect it E“ cables was, to create neutral audiophile cables for a reasonable price. We focused on quality core materials like a copper conductor for a signal transmission without losses. All E-Line connectors, including our True Balanced mini XLR plugs, feature gold-plated brass connectors to ensure a long-lasting ideal conductivity. The line & phono cables, except the True Balanced cables, are semi-symmetrical type cables, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.
Unleash the full power
WHAT'S TRUE BALANCED?
Balanced audio connections are usually known from the professional sector like recording studios or live concerts. It is very important to have a stable & interference free connection, as these signals will be highly amplified. The same applies to the connection from your turntable to the phono preamplifier. The big advantage of a balanced connection is its ability to remove picked up noise and interferences. And best of all, cartridges by nature are already balanced signal transducers! With True Balanced you are simply using everything, literally everything, that your cartridge is picking up from the record groove. You are not throwing away half of the usable signal, like is done in typical single-ended RCA phono connections.
Features
- High quality stereo NF cable
- Optimized for turntable connection
- Low distortion level & neutral sound
- Low capacitance
Available versions:
1 – Connect it Phono E RCA (1.23m)
2 – Connect it Line E RCA (0.41 / 0.82 / 1.23m)
3 – Connect it Phono E 5P/RCA (1.23m)
4 – Connect it Phono E 5P/RCA (angled-5P-plug) (1.23m)
5 – Connect it Phono E 5P/miniXLR* (angled-5P-plug) (1.23m)
6 – Connect it Phono E RCA/miniXLR* (1.23m)
7 – Connect it Phono E miniXLR/miniXLR* (1.23m)
*To use our True Balanced Connection, your Pro-Ject turntable needs to be equipped with an MC cartridge or the Pick it PRO Balanced.
Specifications
Assembly: Quasi-balanced, individually shielded twisted pairs
Conductors: High purity oxygen free copper
Dielectric: Polyethylene
Hacks: Transparent PVC
Length: Pre-configured set 1.23 m
Cable Capacity: 130 pF
Cable Impedance: 77 ohms
Insulation Resistance: 50 M ohm (500V DC)
