Description
Here it is: Alpine S2-A60M
Alpine S-Series amplifiers have carried the reputation of legendary amplifiers on their shoulders for years.
The Alpine S-A32F and S-A60M were Alpine's best-selling amplifiers throughout their existence, and now both of these amplifiers have become available in new, even more improved "S2" versions!
Power and performance
The new generation S-Series S2-A60M is the perfect solution when you want power and top-class sound quality combined with Alpine's unique operational reliability.
The S2-A60M offers 600W of proven power for subwoofers in two (and one) ohm loads. The amplifier is easy to install and is perfectly suited for 8″, 10″ and 12″ subwoofers.
Made for all systems
The S2-A60M is also compatible with new cars where the player cannot be replaced, but you still want better sound reproduction in the car. The amplifier can turn on and off at the right time, and the signal can be fed to the amplifier at speaker level without an excitation cable, speaker level with an excitation cable, and line level with an excitation cable.
Easy to install and use
All the settings of the amplifier can be found at the end of the amplifier, which makes it easier to adjust if the amplifier is installed e.g. under the bench or in vans behind the front seats on the partition wall.
With the amplifier's removable end pieces, you get a simple and elegant installation.
The perfect partner for subbar
The S2-A60M is a perfect amplifier for e.g. two 8″ subwoofers or one 10″ / 12″ element.
The amplifier is stable even with a one-ohm load, which increases the compatibility of the amplifier even more.
Characteristics
Class D Amplifier (Digital)
Type: Mono amplifier
Settings on one page
Advanced heat management
Speaker-level input (requires X12 Line adapter)
Three starting modes (DC HI, Remote HI, Remote LO)
Splitters: Adjustable Low Pass (LPF)
Input sensitivity adjustment
Bass EQ
Screw-in speaker and power terminals
Detachable end pieces
RUX-KNOB2 compatible
TECHNICAL INFORMATION
RMS powers
1 x 600W / 1 Ohms, 14.4V (≤1%THD+N)
1 x 600W / 2 Ohms, 14.4V (≤1%THD+N)
1 x 330W / 4 Ohms, 14.4V (≤1%THD+N)
Adjustments
Low-pass filter: 50 – 400Hz (24dB/oct)
Bass EQ (0 – +12dB)
General
Operating voltage: 14.4 V.DC (9 – 16 V allowed)
Input sensitivity (RCA): Speaker level: 0.5V – 10V / Line level: 0.2V – 4.0V
Speaker-level input with auto-start
Playback range: 10Hz – 400Hz
THD+N (@ 10W/4 Ohms): <0.03%
Damping factor: >1000
Weight: 2.2kg
Dimensions: 220 x 57 x 210mm