Bass kit DD Audio VOW12 DOUBLE

This bass kit is for those who want to play really LOUD!

DD Audio's Basskit contains 2 DD Audio VOW12a-D4 subwoofers and a DD Audio UE-12.2aC port box.

VOW12a-D4:

The new truly robust VO-W12a PA subwoofer brings a new dimension to your car's sound reproduction and makes it livelier and more intense. The DD Audio VO-W series are really solid PA speaker-like elements designed especially for those who want to play really loud! Large voice coils, powerful motors, and a sturdy cast frame. The Element has a wide upper suspension and a sturdy motor, which work together to create a longer range of motion and a speaker that keeps going even when playing really hard. This bass has a really fast transient response! With these elements, you can give your car the same vibe as if you were sitting in the front row at a live concert.

DD Audio UE-12.2aC:

2x12″ DD Audio finished enclosure with plywood front panel.

Note! The case is designed for elements with a cast frame, and the installation hole for the element is therefore 292mm.

Note! If you install a subwoofer with a long range of motion ( xmax ) in the housing, we recommend not installing the protective net, so that the cone of the element does not hit the grille.

Case liter volume 87L

The case is covered with black felt and the DD-Audio logo is on the top side. There is a durable metal protective grill on the front, which prevents impacts to the element in the trunk of the car

On the side of the case there is a well-flowing port and screw terminals. Tuning frequency of the enclosures: 35Hz. The cases are made of durable 19mm MDF board (the front board is made of 19mm plywood)

Note! The case comes with screws for attaching both the protective grille and the elements.

Case dimensions W x H x D 773 x 410 x 510mm.

VOW12a-D4

Speaker Size12″
Watts RMS500-1500
Watts Peak3000
Voice Coil Diameter - in3
Voice Coil Impedance Dual 4 Ohm
Piston Diameter - in10.25
Fs - Hz39
Qms4.381
Qes0.439
Qts0.399
Left - liters30.301
dBSPL88
Xmech - mm70
Xmax - mm8
Frame OD - in12.625
Frame OD w/Gasket - in12.75
Mounting Diameter - in11.125 (28.25cm)
Mounting Depth - in6.75 (17.14cm)
Motor Depth - in3 (7.62cm)
Motor Diameter - in7.87 (19.98cm)
Magnet Weight - oz160 (4.5kg)
Woofer Displacement - ft30.12
Sealed Enclosure - cu ft1.5-2.5 (42-70l)
Ported Enclosure - cu ft1.75-2.75 (49-78l)

Note! The enclosure is designed for subwoofers with a cast-frame, and the mounting hole for the element is therefore 292mm.

Note! If you install a subwoofer with a long xmax we recommend not installing the protective Grill (cone of the subwoofer could hit the Grille)

Enclosure liters: 87

Size: W x H x D 773 x 410 x 510mm