Description
Great performance - in a very compact form factor
The DBA 201F 8-inch active subwoofer offers excellent performance thanks to FEM simulation. The massive magnet of the 8" element offers optimal control in all extreme situations.
Full adjustment features allow for precise fine-tuning
Built-in 24 dB/oct. the low-pass filter allows you to perfectly match the DBA 201 F to your speaker system between 50-150 Hz. With the adjustable bass gain (0÷6 dB @ 45 Hz), you can increase the bass power in the area where you experience attenuation. With the help of phase inversion (0-180°), you can optimize the phase adjustment of the DBA 201 F to suit the rest of the car's audio system. A subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from excessive movement and the amplifier from overheating. The input sensitivity control is the perfect tool for matching the incoming signal to maximum output power without distortion.
Automatic wake-up and standby
Thanks to the built-in signal detection circuit, the DBA 201F wakes up and turns off automatically from a signal. You can also switch the feature off if you want to, if a separate exciter is in use.
CHARACTERISTICS
High performance in a very flat form factor
Built-in 440 watt Class D amplifier
Compatible with all car audio systems
Plug & Play installation thanks to speaker-level input
Full adjustment possibilities
Automatic start and standby mode
Separate level control (wired)
TECHNICAL INFORMATION
Element Size: 8"
RMS power consumption: 220 W
Peak power duration: 440 W
Impedance: 0.4 ohm
Housing: flat, closed
Voice coil: 38.6 mm
Frequency response of the element: 32 - 400 Hz
Magnet size: 110 x 45 x 17 mm
Weight: 4.3 kg
Magnet: Flux Ferrite
Cone: pressed paper
Voice coil: copper
THD @ 100Hz: 0.15%
Amplifier frequency band: 15 - 150 Hz
S/N ratio: 100 dBA
Power RMS: 220 W
Operating voltage: 6.5 - 18 V (15A)
Start - Stop voltage: 6 V
Quiescent current: 260 A (1 m)
Max power consumption with music: 8.5 A
Minimum excitation (rem in): 4 V (1 mA)
Minimum signal for automatic excitation: 10 mV
Speaker-level input excitation min: 2 V
RCA input impedance: 0.2 to 5 V (10k?)
Speaker-level input impedance: 1.2 ÷ 30 V (6?)
Low-pass filter @ 24 dB Oct adjustable: 50 - 150 Hz
Subsonic @ 24 dB Oct: 15 Hz
Phase shift: 0 to 180
Bass Boost @ 45 Hz: 0 ÷ 6 dB
Separate level control volume: 0 ÷ -15 dB (HRC 01)
Dimensions:
Length: 345 mm
Width: 245 mm
Height: 79 mm