Description
The best sound quality
The Alpine Status collection includes many technologies, components and materials familiar from Alpine's F#1 Status collection, which guarantee the best possible sound quality - but at a more affordable price than the F#1 Status collection.
Alpine Status is capable of playing music up to 192kHz/24bit quality, which is available from various online services and streaming platforms.
Hi-Res Audio amplifier
The HDA-F60 Alpine Status is a 4-channel Hi-Res Audio certified amplifier that uses Sierra-H technology (we will tell you more about this in a separate section of this page). The amplifier offers 4 x 100W for a four-ohm load and 4 x 150W for a two-ohm load. If the amplifier is used as a bridge, the output is 2 x 300W for a four-ohm load.
The amplifier's playback range is from ten hertz to sixty kilohertz (10Hz – 60kHz).
Sound quality
Alpine's Status amplifiers use only the best possible and carefully selected components and various technologies that you cannot find from any other manufacturer. The body of the amplifier is copper, which prevents external interference from entering the audio signal. In order for the signal to remain concretely completely unchanged, the circuit board of the amplifier is also black, which prevents possible distortions in the signal caused by light reflections.
HDA-F60 signal to noise ratio is >87dB (1W / 4ohm)
Complete Alpine Status hardware
All components of the Alpine Status collection are made purely with sound quality conditions and the best possible listening pleasure in mind. Unlike the F#1 Status collection, all components of Alpine Status can be purchased separately.
Sierra-H Circuit
When the original analog signal is converted to a digital signal, Sierra-H compares and corrects twice, so that the reproduction is very accurate and nothing is left out of the original music.
Connectors on the same edge
All connectors (power/ground, speaker outputs, RCA inputs, RUX-Knob2) and fuses are on one side of the amplifier. This allows for easy and stylish installation. If you bridge the triple and quadruple channels to the subwoofer, you can use the separate Rux-Knob2 control to control the level of the subwoofer easily.
Heat management
Alpine Status amplifiers have exceptionally advanced thermal management and a protection circuit that can control the operating temperature of the amplifier. Status amplifiers will never shut down due to overheating, but you can enjoy your music without interruption.
Power and speaker connectors
All Alpine Status amplifiers use very compact connectors to which you can securely screw the cables. The connectors facilitate installation and guarantee lossless contact with the terminals.
Top sound quality
Alpine Status can play music at up to 192kHz/24bit quality, which uses more than six times the amount of data compared to a traditional CD or streaming service.
Thanks to this, you get the finest nuances and details out of the music and get as close to studio-level sound as it's ever possible to get.
Characteristics
General
- Amplifier type: 4/3/2 channel
- Class D amplifier
- Power and speaker connections with connectors
- Copper frame
- All adjustments on top of the amplifier (under the protective cover)
- Black circuit board
- Advanced heat management
- Connectors on one side
- Blue LED light
- Compatible level control: RUX-KNOB2
Technical information
RMS
- 4 x 150W (2 Ohm, 14.4V)
- 4 x 100W (4 Ohm, 14.4V)
- 2 x 300W (bridged 4ohm, 14.4V)
Distribution filters
- Own splitters for channel pairs 1/2 and 3/4
- Selectable: Off / Lowpass / Highpass
- Adjustment range: 50 – 400Hz
- Division slope: 12dB/oct.
General
- Input sensitivity (RCA): Hi: 0.5V – 10V / Low: 0.2V – 4.0V
- Playback range: (+0/ -3dB: 1W, 4 Ohm): 10Hz – 60kHz
- THD+N (@ 10W, 4 Ohms): <0.02%
- Attenuation factor (@ 10 W, 4 Ohm @ 100 Hz): >500
- Weight: 3.8kg
Dimensions:
- Width 291 mm
- Height 53.5 mm
- Depth 189.5 mm