Description
Audison Prima APBX 10 AS2 10" Active subwoofer
Updated edition of EISA 2018-2019 best active subwoofer. The impedance of the 10" long-throw double speaker subwoofer is as low as 0.16 ohms, which is supplied by the specially developed internal amplifier with a whopping 400 W RMS power. A new feature in the AS2 version is the amplifier's DBT (Dynamic Bass Tracking) technology, which monitors the incoming signal and eliminates signal spikes that cause distortion , so you can play the subwoofer at full power and the sound always remains dynamic..
The subwoofer has an SSP (Sub Smart Plug) terminal, with which you can easily remove the amplifier from the container. The package comes with a handy wired level control, which allows you to easily manage the general level of the subwoofer directly from the driver's seat.
The ultra-compact subwoofer can be installed to fire upwards when you want the most crisp and accurate reproduction, or downwards, in which case the car's acoustics are used to amplify the lowest frequencies. Velcro attachment paws are included in the package for easy and quick removal.
The APBX10AS2 automatically turns on from both speaker and line level signals.
Characteristics
1. Integrated 400 W class D amplifier with high efficiency.
2. The dynamic bass control technology of the input level utilizes all the power of the amplifier with minimal loss.
3. Butterworth low-pass filter with selectable crossover frequency (50 - 300 Hz) and 12 dB/Oct. with pitch and phase reversal and bass boost (0÷6 db @ 45Hz)
4. The crossover filter can be bypassed when the subwoofer is connected to the AP bit processor.
5. Speaker and line level inputs.
6. Automatic wake-up can be selected from either the remote control, speaker-level input or line-level input to be activated.
7. The extremely low-profile housing is designed to fully utilize the potential of the APS 10 DL element.
8. The SSP (Sub Smart Plug) connector terminal with plug & play connections enables easy disconnection and reconnection of the subwoofer.
9. The 2S² (2 Sides / 2 Sounds) design allows the subwoofer to be installed either with the element up or against the floor.
10. For a downward mounted subwoofer, feet are supplied with velco stickers for easy attachment.
11. Rounded edges enable easy installation in the container and eliminate standing waves that are generated inside the case.
12. Exclusive geometry of the cone, dust cup and basket produce a long travel deviation while keeping the overall depth low.
13. The HRC AP remote control is included in the package.
14. A sturdy metal protective grid keeps the element safe.
Technical information
Type: Active enclosure subwoofer
Bass driver size: 250 mm (10")
Continuous amplifier power: 400 W
Instantaneous amplifier power: 800 W
Impedance: 0.16 Ohm
Magnet: High density flux ferrite
Cone material: Water-repellent pressed paper
Voice coil diameter: 60 mm
Dimensions
Width: 440 mm (A)
Height: 334 mm (B)
Case depth: 135 mm (C)
Housing depth with element protruding: 158 mm (C1)
Weight: 9.4 kg
The remote control allows you to adjust the overall level of the subwoofer from the listening position.
The HRC AP remote control is included in the package
The remote control allows you to adjust the overall level of the subwoofer from the listening position.
Product groups
