Description
- GAS MAD A1-500.1D mono amplifier (recommended price: €129.90)
- GAS MAX B1-18 enclosed subwoofer (recommended price: €229.90)
Now as a package: €279.00!!!
Standard price: €359.80
Offer package:
GAS MAD A1-500.1D mono amplifier
GAS MAX B1-18 enclosed subwoofer
GAS MAD A1-500.1D
500W @ 1ohm
The amplifier offers 500 watts of power in a 1-ohm load, and thanks to the extensive adjustment possibilities, you can get the sound just the way you want it.
Good efficiency
GAS MAD A1 replaces the popular GAS Beat amplifier collection. MAD A1 amplifiers have been developed for a long time and have been improved even more than their predecessors. The end result is really successful!
First of all, the attention is drawn to the aggressive cooling profile, which keeps the amplifier's temperatures under control, even if you command it with a heavy hand. You can forget about heat problems and focus on listening to music, because overheating of the amplifier can be left to other equipment manufacturers.
Extensive adjustment possibilities
The amplifier comes with a wired level control with a clip light , which makes it easy and quick to adjust the level of the Sub from the driver's seat. The clip light turns on if the playback exceeds one percent distortion.
-
Class D mono amplifier
- 1 x 230W (4 ohm)
- 1 x 370W (2 ohm)
- 1 x 500W (1 ohm)
- Playback range: 15 – 300Hz
- Low pass filter (12dB/ok): 30 – 300Hz
- Subsonic: 15 – 50Hz
- Signal to noise ratio: >92dB
- Bass EQ: 0 – 12dB @ 45Hz
- Phase shift: 0 / 180°
- Input sensitivity adjustment: 0.5 – 6V
- Damping factor: >130
- RCA input: Yes
- Speaker-level input: Yes (with autostart)
- Wired level control: Yes
- Clip light in level control / Amplifier: Yes / Yes
- Recommended power / ground cable: 20mm²
- Recommended speaker cable: 1.5 – 4.0mm²
- Dimensions: 194 x 209 x 55mm
- Comprehensive and clear English user manual
GAS MAX B1-18
2 x 2 ohm High Performance element
The GAS MAX B1-18 sub box has a metal frame and a sturdy 8″ sub. The element is designed especially for this case and largely follows the same structure as the subs in GAS's MAX S1 collection.
The cone of the metal-framed element on the double magnet is non-compressible paper pulp with mica reinforcement. The impedance of the element is two two-ohm coils, so the sub can be used with a one-ohm, four-ohm or 2 x 2-ohm load!
The two-inch element has a 2.5" voice coil and there are sturdy protective bars in front of the element.
Really compact, either way!
GAS MAX B1-18 has a very compact size. The volume of the case is only 17 liters and the case is easy to place without exception in any car.
The case comes with separate mounting feet, so you can also use the case with the element down, and with this mounting method you get an extra kick for bass reproduction.
- Reflex case
- 8″ element
- Power rating: 500W RMS / 1000W Max
- Impedance: 1ohm / 2 x 2ohm / 4ohm
- Playback range: 25 – 200Hz
- 2.5″ voice coil
- Cone: Uncompressed paper pulp
- 2 x 56oz double magnet
- Silver plated conductors
- Protective bars in front of the element
- It is also possible to install the element downwards
- Felt upholstery, with GAS embroidery
- Volume: 17 liters
- Comes with jumpers, stand legs, user manual (eng.) and GAS sticker
- Dimensions: 480 x 330 x 208mm
Download the user manual here (.pdf)
