Description
GAS MAD A1-70.2 is a powerful two-channel amplifier, the acquisition of which will not cause financial bankruptcy.
2 x 105W @ 2ohm
The amplifier offers 2 x 105 watts of power into a two-ohm load, or alternatively 2 x 70 watts into a four-ohm load, thanks to comprehensive adjustment possibilities, you get the sound exactly as you want.
Good efficiency
GAS MAD A1 replaces the popular GAS Beat amplifier collection. MAD A1 amplifiers have been developed for a long time and have been improved even more than their predecessors. The end result is really successful!
First of all, the attention is drawn to the aggressive cooling profile, which keeps the amplifier's temperatures under control, even if you command it with a heavy hand. You can forget about heat problems and focus on listening to music, because overheating of the amplifier can be left to other equipment manufacturers.
Better sound quality than before
The inside of the device is not overshadowed by the outer shell. Among other things, the balanced inputs reduce the noise produced by the amplifier and raise the sound quality of the amplifier to a level significantly higher than this price category.
Extensive adjustment possibilities
The adjustment possibilities of the MAD A1-70.2 amplifier are very good. You can use the amplifier to control a stand-alone series, a stand-alone series with its own crossover filters, or alternatively drive, for example, mids or trebles active, using the amplifier's 12dB high-pass or low-pass filters. With the amplifier, you can also command a small four-ohm subwoofer, by bridging the output channels of the amplifier.
The amplifier also has a clip light that lights up if the playback exceeds one percent distortion.
In addition to the RCA input, the amplifier also has a speaker-level input that does not require a wake-up call, but the amplifier starts automatically when it receives a signal, and an RCA output from which you can take the signal to the next amplifier.
- Class AB two-channel amplifier
- 2 x 75W (4 ohms)
- 2 x 105W (2 ohms)
- 1 x 220W (4 ohm, bridged)
- Playback range: 15Hz – 22kHz
- Splitters: Off / Lowpass / Highpass
- Low pass filter (12dB/ok): 50 – 4000Hz
- High pass filter (12dB/ok): 50 – 4000Hz
- Subsonic: No
- Signal to noise ratio: >98dB
- Bass EQ: 0 – 12dB @ 45Hz
- Phase reversal: No
- Input sensitivity adjustment: 0.5 – 6V
- Damping factor: >130
- RCA input: Yes
- Speaker-level input: Yes (with autostart)
- Wired level control: No
- Clip light in the amplifier: Yes
- Recommended power / ground cable: 10mm² – 20mm²
- Recommended speaker cable: 1.5 – 4.0mm²
- Dimensions: 252 x 209 x 55mm
- Comprehensive and clear English user manual
