Klippel optimization has been used in the design of Hydrogen SPL elements. In the 10-hour testing, the behavior of the element is studied with numerous measurement results, and thus the weak points and problems that require improvement are found already in the early design phase. The element is fired with up to four times the power compared to its power duration. The end result is an element with a very even impedance response, i.e. it receives power well at all frequencies, has good sensitivity and withstands power properly.
If you want to play LOUD, the Hydrogen SPL is an excellent choice as an element. These elements have 2x1 ohm voice coils, but their impedance behavior is so smooth that you can use them with Ground Zero's mono amplifiers connected to a nominal load of 0.5 ohm! A solid and well-breathable cast frame holds the element together and allows the subwoofer to breathe properly through the frame. Functional voice coil ventilation and sufficiently robust voice coil keep the operating temperature of the coil correct even during heavy use. The double lower suspension controls the movement of the cone, and the top suspension and cone attachment secured by stitching can withstand even the most violent trajectory.
Technical information: 8″ subwoofer 2x1 ohm voice coils 2.5″ copper voice coil Mounting diameter 187 mm Mounting depth 145 mm Aluminum cast basket Klippel optimized triple magnets Cone Reinforced paper Power Handling 700 W RMS, 1500 W SPL Power Sensitivity 80 dB Xmax 40 mm Fs 38.3 Hz Qts 0.381 Left 4.77 L.
/en/products/ground-zero-gzhw-20xspl-d18437322711378Ground Zero GZHW 20XSPL-D1219,00//audiokauppa.fi/cdn/shop/products/GZHW-20XSPL-D1-2.jpg?v=1683222760//audiokauppa.fi/cdn/shop/products/GZHW-20XSPL-D1-2_large.jpg?v=1683222760EURInStock2681349079838" and smaller subwoofers268172984399All products that are in stock268132221007Car stereo268134809679Car subwoofers268168593487Ground Zero
Ground Zero GZHW 20XSPL-D1
Klippel optimization has been used in the design of Hydrogen SPL elements. In the 10-hour testing, the behavior of the element is studied with numerous measurement results, and thus the weak points and problems that require improvement are found already in the early design phase. The element is fired with up to four times the power compared to its power duration. The end result is an element with a very even impedance response, i.e. it receives power well at all frequencies, has good sensitivity and withstands power properly.
If you want to play LOUD, the Hydrogen SPL is an excellent choice as an element. These elements have 2x1 ohm voice coils, but their impedance behavior is so smooth that you can use them with Ground Zero's mono amplifiers connected to a nominal load of 0.5 ohm! A solid and well-breathable cast frame holds the element together and allows the subwoofer to breathe properly through the frame. Functional voice coil ventilation and sufficiently robust voice coil keep the operating temperature of the coil correct even during heavy use. The double lower suspension controls the movement of the cone, and the top suspension and cone attachment secured by stitching can withstand even the most violent trajectory.
Technical information: 8″ subwoofer 2x1 ohm voice coils 2.5″ copper voice coil Mounting diameter 187 mm Mounting depth 145 mm Aluminum cast basket Klippel optimized triple magnets Cone Reinforced paper Power Handling 700 W RMS, 1500 W SPL Power Sensitivity 80 dB Xmax 40 mm Fs 38.3 Hz Qts 0.381 Left 4.77 L.Ground Zero8" ja pienemmät subwooferitAutohifiAutosubwooferitadd-to-cart//audiokauppa.fi/cdn/shop/products/GZHW-20XSPL-D1-3.jpg?v=1683222760//audiokauppa.fi/cdn/shop/products/GZHW-20XSPL-D1-4.jpg?v=1683222760//audiokauppa.fi/cdn/shop/products/GZHW-20XSPL-D1.jpg?v=168322276046574730346834Default Title219,000,00//audiokauppa.fi/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gifhttps://audiokauppa.fi/en/products/ground-zero-gzhw-20xspl-d1?variant=46574730346834InStockDefault Title
