- Full range SPL bundle
- Closed case
- It's really loud!
- SounDigital 2-channel amplifier
- 2x200 / 1x400W
Ground Zero GZIB 2.165-TT20 BUNDLE includes GZIB 2.165-TT20 SPL box and SounDigital 400.2 EVO 4.0 amplifier
The GZIB 2.165-TT20 differs from the larger versions in that it uses a closed housing instead of a reflex.
The product has 4 Iridium series GZIC 165.2 midbasses and 2 GZTT 20S tweeters, whose sound quality is top-notch!
There are terminals on the side of the case, so all you need to do is connect the speaker wires and you can start enjoying the music!
Free placement: You can put the case wherever you want: On the roof rack, in a camper, in the trunk, on an ATV, in a tractor, or even on the roof to boost your party!
The SounDigital Evolution series amplifiers change the concept of playing LOUD!
This amplifier brand has grown in a short time to become one of the largest manufacturers in Brazil.
And no wonder, because each amplifier is designed and manufactured in their own factory.
The design team includes several big names from the so-called Pancadao builders, these are cars that play music continuously at outdoor events for really long periods of time.
This hobby really puts amplifiers through the paces and no compromise in design is the solution.
GZIB 2.165-TT20
raggarplank
Frequency response: 60 to 20,000 Hz
Impedance 2 x 2 Ohm or 1 x 4 Ohm
Optimized with KLIPPEL
Crossing frequency 6000Hz @ 12dB/ 6dB /octave
Power handling 2 x 100 W RMS @ 2 ohms
Power handling 2 x 200 W MAX @ 2 ohm
Power handling (mono) 1x 200 W RMS @ 4 ohms
Power handling (mono) 1x 400 W MAX @ 4 ohms
Physical dimensions, vertical: 900 x 243 x 169 mm
Physical dimensions, horizontal: 900 x 169 x 243 mm
SD400.2 EVO 4.0
Power @ 12.6V 2x 132 @ 4 Ohm, 2x 200 @ 2 Ohm RMS
Bridge Power @ 12.6V 1x 264 W RMS 8 Ohm, 1x 400 W RMS 4 Ohm.
Operating Voltage: 9V - 16V
THD 0.08%
Frequency Response: 10 – 20,000 Hz
Damping Factor: 200
Low pass filter: 80 Hz on/off
High pass filter: 80 Hz on/off
Dimensions: 113 x 51 x 109 mm
Do not connect the amplifier to less than the rated load!
Do not run your amp under rated impedance!.
