GZ Hydrogen Power 2x12 inc contains 2 pcs GZHW 30XSPL-D1 subwoofers, 4-AI212SLOT housing and Ai-Sonic S2-A2200.1 amplifier with separate level control.
GZHW 30XSPL-D1 :
Klippel optimization has been used in the design of Hydrogen SPL elements. In the 10-hour testing, the behavior of the element is studied with numerous measurement results, and thus the weak points and problems that require improvement are found already in the early design phase. The element is fired with up to four times the power compared to its power duration. The end result is an element with a very even impedance response, i.e. it receives power well at all frequencies, has good sensitivity and withstands power properly.
4-AI212SLOT:
4-AI212SLOT is an ISO housing made of MDF board. A large port with rounded ends flows well. The case is upholstered with black felt, and the front panel has carbon fiber-look tape. The case already has a connector terminal with a cable.
Case dimensions: width 930mm x height 380mm x depth 400mm
S2-A2200.1 With S2-BASS KNOB:
AI-Sonic S2 amplifiers. Designed in Finland by AI-Group.
Excellent sound quality, versatile adjustment features and can be connected to any system to play any speakers. Ai-Sonic S2 amplifiers are really hard to beat.
The ambitious goal was to design and implement an amplifier collection that offers the best possible sound quality in its price range. The work started by designing a unique cooling profile.
Maximizing cooling and minimizing the physical size of the devices continued with circuit board design. The locations of the components on the circuit board are carefully selected in order to achieve the smallest possible physical size of the amplifier and efficient cooling of the components.
Twice as much copper has been used in the circuit board compared to a standard car amplifier circuit board.
Three years have been spent selecting and testing the components of the AI-Sonic S2 amplifiers. By testing and auditioning numerous different parts and combinations of parts, the parts that form the best possible whole in their price category have been found.
Technical information: GZHW 30XSPL-D1:
Model: GZHW 30SPL Diameter: 300 mm / 12″ Mounting diameter: 315 mm / 12.4“ Mounting depth: 198 mm / 7.8“ Voice coil: 75 mm / 3” copper voice coil Cone: Reinforced paper Power Handling: 3000 W SPL Power Impedance: 2 x 1 Ohm SPL: 85dB Xmax: 45mm / 1.77″ Fs: 35.4 Hz Qts: 0.44 Left: 15.8 L / 0.56 cu.ft.
4-AI212SLOT:
Ported enclosure for 2x12″ subwoofer Net volume: 2x40 liters. Port area: 350 cm2 Port height: 350mm Port width: 100mm Tuning frequency: 38 Hz Diameter of speaker hole: 285mm Measurements ( W x H x D ): 930 x 380 x 400.
S2-A2200.1 With S2-BASS KNOB:
RMS POWER (1ohm) THD 0.5% 2200W RMS POWER (2ohm) THD 0.5% 1400W RMS POWER (4ohm) THD 0.5% 750W BRIDGED POWER(2ohm) THD 0.5% 4400 W ( Link ) BRIDGED POWER(4ohm) THD 0.5% 2800W ( Link ) THD: 0.5% BANDWIDTH: 10-200 Hz S/N RATIO(A-WEIGHTED): 90dB INPUT SENSITIVITY: 0.35- 6V LOW PASS: 50-200 Hz SUBSONIC: 10-50Hz CROSSOVER SLOPE: 12dB /24dB/oct BASS BOOST: 0-12dB(@45Hz) POWER FUSE: External 250A
/en/products/gz-hydrogen-power-2x12-inc8575040291154GZ Hydrogen Power 2x12 inc1299,00//audiokauppa.fi/cdn/shop/products/GZ-Hydrogen-Power.jpg?v=1707312220//audiokauppa.fi/cdn/shop/products/GZ-Hydrogen-Power_large.jpg?v=1707312220EURInStock268172984399All products that are in stock626998280530Autohifi for discount code (compare price is empty)268132221007Car stereo268168593487Ground Zero268142116943Ready-made packages
GZ Hydrogen Power 2x12 inc
GZ Hydrogen Power 2x12 inc contains 2 pcs GZHW 30XSPL-D1 subwoofers, 4-AI212SLOT housing and Ai-Sonic S2-A2200.1 amplifier with separate level control.
GZHW 30XSPL-D1 :
Klippel optimization has been used in the design of Hydrogen SPL elements. In the 10-hour testing, the behavior of the element is studied with numerous measurement results, and thus the weak points and problems that require improvement are found already in the early design phase. The element is fired with up to four times the power compared to its power duration. The end result is an element with a very even impedance response, i.e. it receives power well at all frequencies, has good sensitivity and withstands power properly.
4-AI212SLOT:
4-AI212SLOT is an ISO housing made of MDF board. A large port with rounded ends flows well. The case is upholstered with black felt, and the front panel has carbon fiber-look tape. The case already has a connector terminal with a cable.
Case dimensions: width 930mm x height 380mm x depth 400mm
S2-A2200.1 With S2-BASS KNOB:
AI-Sonic S2 amplifiers. Designed in Finland by AI-Group.
Excellent sound quality, versatile adjustment features and can be connected to any system to play any speakers. Ai-Sonic S2 amplifiers are really hard to beat.
The ambitious goal was to design and implement an amplifier collection that offers the best possible sound quality in its price range. The work started by designing a unique cooling profile.
Maximizing cooling and minimizing the physical size of the devices continued with circuit board design. The locations of the components on the circuit board are carefully selected in order to achieve the smallest possible physical size of the amplifier and efficient cooling of the components.
Twice as much copper has been used in the circuit board compared to a standard car amplifier circuit board.
Three years have been spent selecting and testing the components of the AI-Sonic S2 amplifiers. By testing and auditioning numerous different parts and combinations of parts, the parts that form the best possible whole in their price category have been found.
Technical information: GZHW 30XSPL-D1:
Model: GZHW 30SPL Diameter: 300 mm / 12″ Mounting diameter: 315 mm / 12.4“ Mounting depth: 198 mm / 7.8“ Voice coil: 75 mm / 3” copper voice coil Cone: Reinforced paper Power Handling: 3000 W SPL Power Impedance: 2 x 1 Ohm SPL: 85dB Xmax: 45mm / 1.77″ Fs: 35.4 Hz Qts: 0.44 Left: 15.8 L / 0.56 cu.ft.
4-AI212SLOT:
Ported enclosure for 2x12″ subwoofer Net volume: 2x40 liters. Port area: 350 cm2 Port height: 350mm Port width: 100mm Tuning frequency: 38 Hz Diameter of speaker hole: 285mm Measurements ( W x H x D ): 930 x 380 x 400.
S2-A2200.1 With S2-BASS KNOB:
RMS POWER (1ohm) THD 0.5% 2200W RMS POWER (2ohm) THD 0.5% 1400W RMS POWER (4ohm) THD 0.5% 750W BRIDGED POWER(2ohm) THD 0.5% 4400 W ( Link ) BRIDGED POWER(4ohm) THD 0.5% 2800W ( Link ) THD: 0.5% BANDWIDTH: 10-200 Hz S/N RATIO(A-WEIGHTED): 90dB INPUT SENSITIVITY: 0.35- 6V LOW PASS: 50-200 Hz SUBSONIC: 10-50Hz CROSSOVER SLOPE: 12dB /24dB/oct BASS BOOST: 0-12dB(@45Hz) POWER FUSE: External 250A
