If your player does not have RCA outputs for connecting an amplifier, you can still connect the amplifier using high-quality AAC, which changes the speaker outputs to line level.
Features: -Start&Stop* compatible with cars - Ingenious speaker-level input with ADEP** circuit (Advanced Diagnostics Error Protection) - Maximum supply voltage at speaker-level input 14V - Splitter filters can also be used with fully active front speakers thanks to extensive adjustment possibilities.
ADEP* Smart speaker-level input. In the new generation factory-installed car radios, the speakers are also connected to the car's diagnostics, thus the terminals with a normal speaker-level input immediately give a fault code to the car, the ADEP protection developed by Audiotec-Fischer does not cause a fault code in these cars.
Start&Stop** The new type of regulated power source developed by Audiotec-Fischer in the G series enables 100% operation also in Start&Stop cars, i.e. the amplifier stays on, even if the voltage sometimes drops to around 6 volts. This also causes no damage to the amplifier itself thanks to intelligent regulation.
Technical information: Maximum speaker input level: 16 Vrms (= 65 Watts / 4 Ohms) Maximum output level: 4.0 Volt Frequency response: 18 Hz to 80,000 Hz Input Impedance: 13 Ohm Maximum current for remote output: 200 mA Dimensions: (H x W x D): 77 x 37 x 20 mm.
/en/products/helix-aac-3-linjamuunnin8438681141586Helix AAC.3 line converter79,00//audiokauppa.fi/cdn/shop/products/AAC.3_29351920-a802-42b7-b8d1-073669ec1b99.jpg?v=1683349595//audiokauppa.fi/cdn/shop/products/AAC.3_29351920-a802-42b7-b8d1-073669ec1b99_large.jpg?v=1683349595EURInStock268172984399All products that are in stock268142280783Auto hifi Accessories626998280530Autohifi for discount code (compare price is empty)268132221007Car stereo268168691791Helix268142411855RCA cables for the car
Helix AAC.3 line converter
If your player does not have RCA outputs for connecting an amplifier, you can still connect the amplifier using high-quality AAC, which changes the speaker outputs to line level.
Features: -Start&Stop* compatible with cars - Ingenious speaker-level input with ADEP** circuit (Advanced Diagnostics Error Protection) - Maximum supply voltage at speaker-level input 14V - Splitter filters can also be used with fully active front speakers thanks to extensive adjustment possibilities.
ADEP* Smart speaker-level input. In the new generation factory-installed car radios, the speakers are also connected to the car's diagnostics, thus the terminals with a normal speaker-level input immediately give a fault code to the car, the ADEP protection developed by Audiotec-Fischer does not cause a fault code in these cars.
Start&Stop** The new type of regulated power source developed by Audiotec-Fischer in the G series enables 100% operation also in Start&Stop cars, i.e. the amplifier stays on, even if the voltage sometimes drops to around 6 volts. This also causes no damage to the amplifier itself thanks to intelligent regulation.
Technical information: Maximum speaker input level: 16 Vrms (= 65 Watts / 4 Ohms) Maximum output level: 4.0 Volt Frequency response: 18 Hz to 80,000 Hz Input Impedance: 13 Ohm Maximum current for remote output: 200 mA Dimensions: (H x W x D): 77 x 37 x 20 mm.HelixAutohifiAutohifi tarvikkeetRCA-kaapelit autoonadd-to-cart46579307184466Default Title79,00//audiokauppa.fi/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gifhttps://audiokauppa.fi/en/products/helix-aac-3-linjamuunnin?variant=46579307184466InStockDefault Title
