The HELIX COMPOSE i3 series is a top-quality stand-alone series with an excellent price/quality ratio.
The ohm number of Compose series speakers is optimized with Helix / Match DSP processors in mind.
Compose i3 series use high-quality materials:
- Titanium helmet treble with excellent sound quality.
- The very light and coated paper cone of the midbass guarantees accurate and detailed reproduction.
- The body of the midbass is made of polymer composite, which is additionally reinforced with glass beads, and thus a very stiff and reverberant-free material has been obtained.
- Powerful magnets.
- Separate high-quality crossover filter with 6-stage treble level control.
One of the key elements of the Compose series is the patented mounting system called FlexMount, which is based on specially developed speaker adapters. With this technology, you can install i3 speakers in an almost infinite number of car models by changing the adapter ring that fits your car.
FlexMount adapter rings are either included with the speaker or can be purchased separately (don't forget to look at our FlexMount selection).
The i3 series is compatible with all FlexMount, FlexConnect, ProConnect and WireKits adapters.
Note! 8″ models are supplied with protective grilles.
Technical information: Power handling RMS / Max. P 100 / 150 Watts Frequency response 50 Hz to 25,000 Hz Impedance Z 3 Ω Sensitivity SPL 94 dB @ 2.83V / 1m 90dB @ 1W / 1m Outer diameter ø Tweeter: 32.0 mm / 1.26” Woofer: 195.0 mm / 7.68” Woofer with universal mounting ring: 208.9 mm / 8.22″
Installation diameter ø Tweeter: 32.0 mm / 1.26” Woofer: 173.5 mm / 6.83”
Installation depth Tweeter: 9.8 mm / 0.39” Woofer: 63.7 mm / 2.51”
Dimensions crossover 103.3 x 50.4 x 25.0 mm / 4.07 x 1.98 x 0.98”
Woofer Impedance Z 3 Ω DC resistance Re 3.0 Ω Resonance frequency Fs 67 Hz Mechanical Q factor Qms 4.25 Electrical Q factor Qes 0.93 Total Q factor Qts 0.76 Compliance Cms 300 μm/N Equivalent air volume Vas 19.0 L Force factor B*l 5.1 Tm Cone area Sd 214 cm2 Moving mass Mms 18.8 g Mechanical resistance Rms 1.87 kg/s Voice coil diameter ø 25 mm Voice coil winding height
11.6 mm Max. linear excursion Xmax +/- 3.8 mm
Tweeter Impedance Z 4 Ω Resonance frequency Fs 1800 Hz Voice coil diameter ø 20 mm
Features Tweeter Ultra compact, Titanium dome, neodymium magnet and FlexMount20
Woofer Paper with Cenosphere coating, ProConnect terminal, FlexMount200 and Grille
Crossover Tweeter: 12 dB highpass, protection and level adjustment
/en/products/helix-ci3-k200-2fm-s3-3ohm8558315012434Helix Ci3 K200.2FM-S3 - 3Ohm349,00//audiokauppa.fi/cdn/shop/products/Ci3-K200-2FM-S3.jpg?v=1693381449//audiokauppa.fi/cdn/shop/products/Ci3-K200-2FM-S3_large.jpg?v=1693381449EURInStock2681365136158" and larger compo sets for the car268172984399All products that are in stock268142280783Auto hifi Accessories626998280530Autohifi for discount code (compare price is empty)268132221007Car stereo268135989327compo sets for the car268168691791Helix
Helix Ci3 K200.2FM-S3 - 3Ohm
The HELIX COMPOSE i3 series is a top-quality stand-alone series with an excellent price/quality ratio.
The ohm number of Compose series speakers is optimized with Helix / Match DSP processors in mind.
Compose i3 series use high-quality materials:
- Titanium helmet treble with excellent sound quality.
- The very light and coated paper cone of the midbass guarantees accurate and detailed reproduction.
- The body of the midbass is made of polymer composite, which is additionally reinforced with glass beads, and thus a very stiff and reverberant-free material has been obtained.
- Powerful magnets.
- Separate high-quality crossover filter with 6-stage treble level control.
One of the key elements of the Compose series is the patented mounting system called FlexMount, which is based on specially developed speaker adapters. With this technology, you can install i3 speakers in an almost infinite number of car models by changing the adapter ring that fits your car.
FlexMount adapter rings are either included with the speaker or can be purchased separately (don't forget to look at our FlexMount selection).
The i3 series is compatible with all FlexMount, FlexConnect, ProConnect and WireKits adapters.
Note! 8″ models are supplied with protective grilles.
Technical information: Power handling RMS / Max. P 100 / 150 Watts Frequency response 50 Hz to 25,000 Hz Impedance Z 3 Ω Sensitivity SPL 94 dB @ 2.83V / 1m 90dB @ 1W / 1m Outer diameter ø Tweeter: 32.0 mm / 1.26” Woofer: 195.0 mm / 7.68” Woofer with universal mounting ring: 208.9 mm / 8.22″
Installation diameter ø Tweeter: 32.0 mm / 1.26” Woofer: 173.5 mm / 6.83”
Installation depth Tweeter: 9.8 mm / 0.39” Woofer: 63.7 mm / 2.51”
Dimensions crossover 103.3 x 50.4 x 25.0 mm / 4.07 x 1.98 x 0.98”
Woofer Impedance Z 3 Ω DC resistance Re 3.0 Ω Resonance frequency Fs 67 Hz Mechanical Q factor Qms 4.25 Electrical Q factor Qes 0.93 Total Q factor Qts 0.76 Compliance Cms 300 μm/N Equivalent air volume Vas 19.0 L Force factor B*l 5.1 Tm Cone area Sd 214 cm2 Moving mass Mms 18.8 g Mechanical resistance Rms 1.87 kg/s Voice coil diameter ø 25 mm Voice coil winding height
11.6 mm Max. linear excursion Xmax +/- 3.8 mm
Tweeter Impedance Z 4 Ω Resonance frequency Fs 1800 Hz Voice coil diameter ø 20 mm
Features Tweeter Ultra compact, Titanium dome, neodymium magnet and FlexMount20
Woofer Paper with Cenosphere coating, ProConnect terminal, FlexMount200 and Grille
Crossover Tweeter: 12 dB highpass, protection and level adjustmentHelix8" ja isommat erillissarjatAutohifiAutohifi tarvikkeetadd-to-cart46947149709650Default Title349,00//audiokauppa.fi/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gifhttps://audiokauppa.fi/en/products/helix-ci3-k200-2fm-s3-3ohm?variant=46947149709650InStockDefault Title
