The HELIX COMPOSE i7 series represents an uncompromising top level that guarantees an excellent sound experience in your vehicle. With obvious influence from its high-end sister brand BRAX, the i7 speaker series is completely manufactured in Germany and optimized for uncompromising sound quality.
The ohm number of Compose series speakers is optimized with Helix / Match DSP processors in mind.
Only high-quality materials are used in the Compose i7 series:
- The cones are UHD (ultra high damping crafter paper cone) paper cones
- The frames are made of polymer composite, which is additionally reinforced with glass beads, resulting in a very stiff and reverberant-free material.
- Very powerful magnets
One of the key elements of the Compose series is the patented mounting system called FlexMount, which is based on specially developed speaker adapters.
With this technology, you can install the i 7 speakers in an almost infinite number of car models by changing the adapter ring that fits your car. The speaker is attached/detached from the adapter ring by turning it, causing the protrusions on the element to detach from the adapter.
FlexMount adapter rings are either included with the speaker or can be purchased separately (don't forget to look at our FlexMount selection).
The i7 series is compatible with all FlexMount, FlexConnect, ProConnect and WireKits adapters.
Technical information: Power handling RMS / max. P 120 / 180 Watts Impedance Z 3 Ω DC resistance Re 2.9 Ω Frequency response 70 Hz to 4,000 Hz Resonance frequency Fs 73 Hz Mechanical Q factor Qms 2.38 Electrical Q factor Qes 0.50 Total Q factor Qts 0.41 Compliance Cms 420 µm/N Equivalent air volume Vas 4.3 L Force factor B*I 5.5 Tm Sensitivity SPL 92 dB @ 2.83 V / 1m 88dB @ 1W / 1m Cone area Sd 85 cm² Moving mass Mms 11.1 g Cone material Ultra high damping (UHD) crafted paper cone Mechanical resistance Rms 2.15 kg/s Voice coil diameter ø 25 mm Voice coil winding height 12.8 mm Max. linear excursion Xmax +/- 3.4 mm Outer diameter ø 130 mm / 5.12″ Installation diameter ø 116.5 mm / 4.59″ Installation depth 58.5 mm / 2.31″
Features ProConnect terminal
Compatibility Wirekits
Scope of delivery 2 x Ci7 W130-S3 2 x Connection cable 2 x Mounting material
/en/products/helix-compose-i7-ci7-w130-s3-3-ohm8594718294354Helix Compose i7 - Ci7 W130-S3 - 3 Ohm399,00//audiokauppa.fi/cdn/shop/products/HELIX-Ci7-W130-S3-EISA.jpg?v=1696072380//audiokauppa.fi/cdn/shop/products/HELIX-Ci7-W130-S3-EISA_large.jpg?v=1696072380EURInStock2681407079195.25" speakers268172984399All products that are in stock268142280783Auto hifi Accessories626998280530Autohifi for discount code (compare price is empty)268132221007Car stereo268168691791Helix268140642383speakers
Helix Compose i7 - Ci7 W130-S3 - 3 Ohm
The HELIX COMPOSE i7 series represents an uncompromising top level that guarantees an excellent sound experience in your vehicle. With obvious influence from its high-end sister brand BRAX, the i7 speaker series is completely manufactured in Germany and optimized for uncompromising sound quality.
The ohm number of Compose series speakers is optimized with Helix / Match DSP processors in mind.
Only high-quality materials are used in the Compose i7 series:
- The cones are UHD (ultra high damping crafter paper cone) paper cones
- The frames are made of polymer composite, which is additionally reinforced with glass beads, resulting in a very stiff and reverberant-free material.
- Very powerful magnets
One of the key elements of the Compose series is the patented mounting system called FlexMount, which is based on specially developed speaker adapters.
With this technology, you can install the i 7 speakers in an almost infinite number of car models by changing the adapter ring that fits your car. The speaker is attached/detached from the adapter ring by turning it, causing the protrusions on the element to detach from the adapter.
FlexMount adapter rings are either included with the speaker or can be purchased separately (don't forget to look at our FlexMount selection).
The i7 series is compatible with all FlexMount, FlexConnect, ProConnect and WireKits adapters.
Technical information: Power handling RMS / max. P 120 / 180 Watts Impedance Z 3 Ω DC resistance Re 2.9 Ω Frequency response 70 Hz to 4,000 Hz Resonance frequency Fs 73 Hz Mechanical Q factor Qms 2.38 Electrical Q factor Qes 0.50 Total Q factor Qts 0.41 Compliance Cms 420 µm/N Equivalent air volume Vas 4.3 L Force factor B*I 5.5 Tm Sensitivity SPL 92 dB @ 2.83 V / 1m 88dB @ 1W / 1m Cone area Sd 85 cm² Moving mass Mms 11.1 g Cone material Ultra high damping (UHD) crafted paper cone Mechanical resistance Rms 2.15 kg/s Voice coil diameter ø 25 mm Voice coil winding height 12.8 mm Max. linear excursion Xmax +/- 3.4 mm Outer diameter ø 130 mm / 5.12″ Installation diameter ø 116.5 mm / 4.59″ Installation depth 58.5 mm / 2.31″
Features ProConnect terminal
Compatibility Wirekits
Scope of delivery 2 x Ci7 W130-S3 2 x Connection cable 2 x Mounting materialHelix5.25" erilliselementitAutohifiAutohifi tarvikkeetadd-to-cart47076630430034Default Title399,00//audiokauppa.fi/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gifhttps://audiokauppa.fi/en/products/helix-compose-i7-ci7-w130-s3-3-ohm?variant=47076630430034InStockDefault Title
