The HELIX COMPOSE i7 series represents an uncompromising top level that guarantees an excellent sound experience in your vehicle. With obvious influence from its high-end sister brand BRAX, the i7 speaker series is completely manufactured in Germany and optimized for uncompromising sound quality.
The ohm number of Compose series speakers is optimized with Helix / Match DSP processors in mind.
Only high-quality materials are used in the Compose i7 series:
- The cones are UHD (ultra high damping crafter paper cone) paper cones
- The frames are made of polymer composite, which is additionally reinforced with glass beads, resulting in a very stiff and reverberant-free material.
- Very powerful magnets
One of the key elements of the Compose series is the patented mounting system called FlexMount, which is based on specially developed speaker adapters. With this technology, you can install the i 7 speakers in an almost infinite number of car models by changing the adapter ring that fits your car. The speaker is attached/detached from the adapter ring by turning it, so that the protrusions on the element detach from the adapter.
FlexMount adapter rings are either included with the speaker or can be purchased separately (don't forget to look at our FlexMount selection).
The i7 series is compatible with all FlexMount, FlexConnect, ProConnect and WireKits adapters.
Protective grills for the speakers are delivered with the package.
Technical information: Power RMS / max. P 150 / 225 Watts Impedance Z 3 Ω DC resistance Re 3.0 Ω Frequency response 35 Hz to 2,500 Hz Resonance frequency Fs 52 Hz Mechanical Q factor Qms 6.04 Electrical Q factor Qes 0.78 Total Q factor Qts 0.69 Compliance Cms 370 µm/N Equivalent air volume Vas 20.8 L Force factor B*I 5.6 Tm Sensitivity SPL 92 dB @ 2.83 V / 1m 88dB @ 1W / 1m Cone area Sd 201 cm² Moving mass Mms 25.6 g Cone material Ultra high damping (UHD) crafted paper cone Mechanical resistance Rms 1.40 kg/s Voice coil diameter ø 37 mm Voice coil winding height 13.8 mm Max. linear excursion Xmax +/- 3.9 mm Outer diameter ø 195 mm / 7.68″ Outer diameter with universal mounting ring ø 208.9 mm / 8.22″ Installation diameter ø 173.5 mm / 6.83″ Installation depth 65.8 mm / 2.59″ Features ProConnect terminal, FlexMount200 Grill
Compatibility Flexmount200 WireKits
Scope of delivery 2 x Ci7 W200FM-S3 2 x Universal mounting ring with Grille 2 x Connection cables 2 x Mounting material
/en/products/helix-compose-i7-ci7-w200fm-s38558314029394Helix Compose i7 - Ci7 W200FM-S3404,25//audiokauppa.fi/cdn/shop/products/Ci7-W200FM-S3.jpg?v=1693381430//audiokauppa.fi/cdn/shop/products/Ci7-W200FM-S3_large.jpg?v=1693381430EURInStock2681407734558" speakers and other sizes268172984399All products that are in stock268142280783Auto hifi Accessories268132221007Car stereo268168691791Helix268140642383speakers
Helix Compose i7 - Ci7 W200FM-S3
The HELIX COMPOSE i7 series represents an uncompromising top level that guarantees an excellent sound experience in your vehicle. With obvious influence from its high-end sister brand BRAX, the i7 speaker series is completely manufactured in Germany and optimized for uncompromising sound quality.
The ohm number of Compose series speakers is optimized with Helix / Match DSP processors in mind.
Only high-quality materials are used in the Compose i7 series:
- The cones are UHD (ultra high damping crafter paper cone) paper cones
- The frames are made of polymer composite, which is additionally reinforced with glass beads, resulting in a very stiff and reverberant-free material.
- Very powerful magnets
One of the key elements of the Compose series is the patented mounting system called FlexMount, which is based on specially developed speaker adapters. With this technology, you can install the i 7 speakers in an almost infinite number of car models by changing the adapter ring that fits your car. The speaker is attached/detached from the adapter ring by turning it, so that the protrusions on the element detach from the adapter.
FlexMount adapter rings are either included with the speaker or can be purchased separately (don't forget to look at our FlexMount selection).
The i7 series is compatible with all FlexMount, FlexConnect, ProConnect and WireKits adapters.
Protective grills for the speakers are delivered with the package.
Technical information: Power RMS / max. P 150 / 225 Watts Impedance Z 3 Ω DC resistance Re 3.0 Ω Frequency response 35 Hz to 2,500 Hz Resonance frequency Fs 52 Hz Mechanical Q factor Qms 6.04 Electrical Q factor Qes 0.78 Total Q factor Qts 0.69 Compliance Cms 370 µm/N Equivalent air volume Vas 20.8 L Force factor B*I 5.6 Tm Sensitivity SPL 92 dB @ 2.83 V / 1m 88dB @ 1W / 1m Cone area Sd 201 cm² Moving mass Mms 25.6 g Cone material Ultra high damping (UHD) crafted paper cone Mechanical resistance Rms 1.40 kg/s Voice coil diameter ø 37 mm Voice coil winding height 13.8 mm Max. linear excursion Xmax +/- 3.9 mm Outer diameter ø 195 mm / 7.68″ Outer diameter with universal mounting ring ø 208.9 mm / 8.22″ Installation diameter ø 173.5 mm / 6.83″ Installation depth 65.8 mm / 2.59″ Features ProConnect terminal, FlexMount200 Grill
Compatibility Flexmount200 WireKits
Scope of delivery 2 x Ci7 W200FM-S3 2 x Universal mounting ring with Grille 2 x Connection cables 2 x Mounting material539,00Helix8" erilliselementit ja muutAutohifiAutohifi tarvikkeetadd-to-cart46947148726610Default Title404,25539,00//audiokauppa.fi/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gifhttps://audiokauppa.fi/en/products/helix-compose-i7-ci7-w200fm-s3?variant=46947148726610InStockDefault Title
