Whether upgrading to a multi-channel premium sound system or even designing a completely new sound setup, the HELIX V EIGHTEEN DSP is an all-in-one tool for anyone with insatiable sound system goals. This versatile DSP sets new standards for enhancing and implementing highly complex audio systems.
The new 32-bit ACO platform enables fast operation in everything, but it also does a lot more. The most important feature is the analysis of the signal of OEM sound sources and the automatic correction of the response. This compensates for input signal distortions that are often done in OEM devices to compensate for low-quality original speakers.
The HELIX V EIGHTEEN DSP fits seamlessly behind any OEM audio source thanks to the ADEP.3 circuit and incredibly wide input sensitivity. The input sensitivity of 4-32 Volts in the speaker-level input enables installation behind OEM amplifiers in those cars where it is impossible to remove it from behind the player.
Specifications: Power RMS ≤ 1% THD+N - @ 4 Ohms Channel 1 - 12: 70 Watts Channel 13 - 18: 75 Watts - @ 2 Ohms Channel 13 - 18: 120 Watts - @ 1 Ohm - - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power per channel* Channel 1 - 12: Up to 100 Watts RMS @ 3 Ohms Channels 13 - 18: Up to 160 Watts RMS @ 2 Ohms Amplifier technology Pure Class GD Inputs 6 x RCA / RCA 18 x High level speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Remote In Input sensitivity RCA / RCA: max. 4 or 8 Volts High level: max. 16 or 32 Volts Input impedance RCA / RCA 12 kOhms Input impedance high level 9 - 33 Ohms or 20 kOhms with ADEP.3 Outputs 18 x Speaker output 2 x RCA / Cinch 2 x Remote Out Output voltage RCA / RCA 3 Volts Frequency response 20 Hz to 22,000 Hz DSP resolution 64 Bit DSP power 2 x 295 MHz (2.4 billion MAC operations/second) Sampling rate 48 kHz DSP type 2 x Audio signal processor Signal converters A/D: BurrBrown 24 Bit D/A: Burr Brown 24 Bit Signal-to-noise ratio digital input 107 dB (A-weighted) Signal-to-noise ratio analog input 102 dB (A-weighted) Distortion (THD) 0.015% Damping factor 50 Operating voltage 10.5 - 18 Volts (max. 5 sec. down to 6 Volts) Power rating DC 12 V ⎓ 108 A max. Idle current 1.3 A Max. remote output current 500 mA Operating temperature range -40° C to +70° C Fuse 3 x 30 A LP-Mini-fuse (APS) Additional features HEC slot, ADEP.3 circuit, Smart Control Port, Auto Remote switch, 32 Bit CoProcessor Dimensions (H x W x D) 44 x 255 x 220 mm / 1.73 x 10.04 x 8.66“
/en/products/helix-v-eighteen-dsp9621340225874HELIX V EIGHTEEN DSP1799,00//audiokauppa.fi/cdn/shop/files/HELIX-V-EIGHTEEN-DSP-Pers.jpg?v=1724002816//audiokauppa.fi/cdn/shop/files/HELIX-V-EIGHTEEN-DSP-Pers_large.jpg?v=1724002816EURInStock268172984399All products that are in stock268142280783Auto hifi Accessories609707753810Auto hifi News626998280530Autohifi for discount code (compare price is empty)268132221007Car stereo268168691791Helix
HELIX V EIGHTEEN DSP
Whether upgrading to a multi-channel premium sound system or even designing a completely new sound setup, the HELIX V EIGHTEEN DSP is an all-in-one tool for anyone with insatiable sound system goals. This versatile DSP sets new standards for enhancing and implementing highly complex audio systems.
The new 32-bit ACO platform enables fast operation in everything, but it also does a lot more. The most important feature is the analysis of the signal of OEM sound sources and the automatic correction of the response. This compensates for input signal distortions that are often done in OEM devices to compensate for low-quality original speakers.
The HELIX V EIGHTEEN DSP fits seamlessly behind any OEM audio source thanks to the ADEP.3 circuit and incredibly wide input sensitivity. The input sensitivity of 4-32 Volts in the speaker-level input enables installation behind OEM amplifiers in those cars where it is impossible to remove it from behind the player.
Specifications: Power RMS ≤ 1% THD+N - @ 4 Ohms Channel 1 - 12: 70 Watts Channel 13 - 18: 75 Watts - @ 2 Ohms Channel 13 - 18: 120 Watts - @ 1 Ohm - - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power per channel* Channel 1 - 12: Up to 100 Watts RMS @ 3 Ohms Channels 13 - 18: Up to 160 Watts RMS @ 2 Ohms Amplifier technology Pure Class GD Inputs 6 x RCA / RCA 18 x High level speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Remote In Input sensitivity RCA / RCA: max. 4 or 8 Volts High level: max. 16 or 32 Volts Input impedance RCA / RCA 12 kOhms Input impedance high level 9 - 33 Ohms or 20 kOhms with ADEP.3 Outputs 18 x Speaker output 2 x RCA / Cinch 2 x Remote Out Output voltage RCA / RCA 3 Volts Frequency response 20 Hz to 22,000 Hz DSP resolution 64 Bit DSP power 2 x 295 MHz (2.4 billion MAC operations/second) Sampling rate 48 kHz DSP type 2 x Audio signal processor Signal converters A/D: BurrBrown 24 Bit D/A: Burr Brown 24 Bit Signal-to-noise ratio digital input 107 dB (A-weighted) Signal-to-noise ratio analog input 102 dB (A-weighted) Distortion (THD) 0.015% Damping factor 50 Operating voltage 10.5 - 18 Volts (max. 5 sec. down to 6 Volts) Power rating DC 12 V ⎓ 108 A max. Idle current 1.3 A Max. remote output current 500 mA Operating temperature range -40° C to +70° C Fuse 3 x 30 A LP-Mini-fuse (APS) Additional features HEC slot, ADEP.3 circuit, Smart Control Port, Auto Remote switch, 32 Bit CoProcessor Dimensions (H x W x D) 44 x 255 x 220 mm / 1.73 x 10.04 x 8.66“HelixAutohifiAutohifi tarvikkeetuutuusadd-to-cart//audiokauppa.fi/cdn/shop/files/HELIX-V-EIGHTEEN-DSP-Front-Inputs.jpg?v=1724002816//audiokauppa.fi/cdn/shop/files/HELIX-V-EIGHTEEN-DSP-Front-Outputs.jpg?v=172400281649290760978770Default Title1799,00//audiokauppa.fi/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gifhttps://audiokauppa.fi/en/products/helix-v-eighteen-dsp?variant=49290760978770InStockDefault Title
