Music Hall mmf-11.3SE
The Music Hall mmf-11.1 is the flagship model of the collection, a belt-driven audiophile level turntable that utilizes the four-layer sandwitcsh design.
With a distinctive design, we have tried to isolate the critical sound reproduction components from each other, each element that can cause interference has its own part of the frame. The tonearm is mounted on the top frame and a reverse ceramic fluid lubricated main bearing is mounted on the second frame, allowing the partially recessed 1 1/2″ acrylic turntable to rotate freely.
The most important qualities:
- Music Hall's unique four-story design with vibration isolation implemented with sorbotane
- One piece carbon fiber Project '9cc Evolution' tonearm
- The tonearm has a 4-point joint bearing that uses precise ABEC bearings
- The inner conductor cable of the sound arm is made of very pure copper
- Only two contact points from the audio box to the output jacks
- The center of gravity of the counterweight is precisely measured with the center of gravity of the needle, so resonance is as minimal as possible
- Fully Adjustable and Damped (VTA) tonearm lift mechanism
- Microprocessor-controlled and electronically adjustable dual motor system
- 33 1⁄3 and 45 rpm speed change at the push of a button
- The motors and flywheel assembly are mounted on their own resonance-free base plate in the lower part of the frame
- Magnetic levitation adjustable isolation feet
- Reversible ceramic fluid-lubricated main bearing for ultra-quiet operation
- Sturdy acrylic plate
- Removable acrylic dust cover
- High quality gold plated RCA connectors with detachable phono cable
- Silent, belt-driven version
- low noise fully manual belt drive, dust cover, 45 rpm adapter
- Delivered in a beautiful wooden box
- Integrated wad gauge for precise adjustment
- Dust cover and 45 rpm adapter included
Specifications
- speed of turntable: 33 1/3 or 45 rpm
- change speed: electronically, luminous buttons
- deviation speed: < ±0.1%
- variance speed: < ±0.08%
- mechanical distance: > -45dB
- electrical distance: > -65dB
- drive: Silicone belt over pulley
- motor: 2 x Synchronous motors; the motor is controlled via microprocessor
- platter: Acrylic (11.8 in., 300 mm) weight – (7.4lbs., 3.35 kg)
- power: switching power supply (90 – 246 VAC, 47-63Hz) type EU, UK, USA
- electric input: 23W DC
- effective arm length: 9in. (230mm)
- effective arm mass: 8.5 g
- mounting distance: 8.3 in (212 mm)
- overlap: .71 in (18 mm)
- crank angle: 24°
- course zero error angle: ø 130.5, ø 243.7
- force on the tip: 0-3 g
- plinth material: MDF
- belt material: Silicone rubber
Dimensions and weight:
- Dimensions: 465 x 190 x 340mm
- Dimensions: 465 x 440 x 450mm (dust cover opened)
- Weight: 17.9 kg