Phoenix Gold Z110ABV2 Active subwoofer

The Phoenix Gold Z110ABV2 is an active subwoofer with a 10-inch element, in a brand new price category! The ten-inch element is placed in an elegant case with a reflex tunnel, on the back wall of which there is an 80W class AB amplifier. The subbar also has a speaker-level input, with which the signal can be brought in, even if there are no RCA outputs on the car stereo.
The Z110ABV2 comes with comprehensive installation accessories, starting with RCA and power cables, and the subwoofer also comes with a dashboard-mounted level controller.

Amplifier
The Z110ABV2 AB class mono amplifier is embedded in the back wall of the subwoofer box. This makes installation easier, because you don't have to think about the installation location in the trunk for a separate amplifier, but everything is in one package.
The amplifier has an adjustable 50-200Hz low-pass filter 6dB/oct. with a steepness and the active subwoofer comes with a dashboard-mounted level control, from which the level of the Sub can be easily adjusted.
The amplifier also understands a speaker-level signal, so the subwoofer can also be installed behind a player that does not have RCA outputs.

Installation accessories
Subbar is supplied with comprehensive installation accessories, starting with power, grounding and signal cables.

• 10″ element
• Class AB amplifier:
  • 80W RMS
  • 160W Max
  • 320W Peak
• Playback range: 10Hz – 200Hz
• Low pass filter: 50Hz – 200Hz
• Filter pitch: 6dB/oct.
• RCA and speaker level input: Yes
• Speaker-level input with auto-start: No
• Wired level control
• Housing: With reflex tunnel
• Case dimensions: 476 x 343 x 331mm

Installation accessories included:

• 5.5m 6mm2 power cable with fuse holder (30A)
• 1.2m 6mm2 grounding cable with ring connector
• 5m 0.75mm2 excitation cable with fork connector
• 4.5m RCA cable
• Speaker-level input, with open wires
• Dashboard mounted level controller with 6m cable
• Shrink socks
• Additional fuse