The Phoenix Gold ZDA4.6 is a four-channel amplifier with a six-channel processor that offers very versatile adjustment possibilities
ZDAPV1 provides 4 x 60W into a four ohm load or alternatively 4 x 100W into two ohms. The amplifier has six-channel RCA outputs and a built-in six-channel signal processor. This enables, for example, the connection of a separate subwoofer amplifier, and you have all the ZDA4.6 processor's adjustment possibilities for this external amplifier as well.
You can make the processor adjustments on a computer that is connected with the supplied USB cable. Alternatively, you can get a separate Bluetooth receiver, which allows adjustments to be made with a free Android or iOS phone and also brings the possibility of streaming music directly to the amplifier via Bluetooth.
At the bottom of the page you can see the adjustment view of the PC program.
Optional accessories:
- ZDABT Bluetooth receiver
- ZDACT Controller
-
ZDAISOT ISO connector T-wire harness
Technical information:
- 4 x 60W (4 ohms)
- 4 x 100W (2 ohms)
- Signal to noise ratio: 102dB
- Controllable on PC
- Controllable by Android / iOS phone (requires ZDABT receiver)
- Built-in six-channel DSP with very versatile adjustment possibilities (see image below)
- Channel-specific time delay adjustments
- Channel-specific equalizers
- Channel-specific low-pass and high-pass filters
- 3.0m USB cable included
- Excitation output for another amplifier or active subwoofer
- Ready settings available for download
- Easy to install