Elac Miracord 50
The ELAC Miracord 50 turntable is designed to produce exceptional vinyl reproduction. This versatile turntable is inspired by the iconic Miracord name from Stereo's golden age when turntables ruled the market. The Miracord 50 is equipped with a belt-driven motor and a die-cast aluminum sheet platform. The straight-tube tonearm with removable headshell includes a factory-installed MM tonebox. T he turntable has a built-in phono preamplifier, allowing you to add this turntable to virtually any music system.
Technical information:
Turntable part
- Operating system: Belt drive
- Motor: DC motor
- Selectable speeds: 33⅓ and 45 rpm
- Motor servo: Speed rotation and servo system
- Rotation speed variation: +/- 1%
- Wow and flutter: 1%
- Signal-to-noise ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
- Platter: Cast aluminum
- Plywood diameter: 300 mm
Tone arm
- Type: Aluminum tube, statically balanced
- Actual stem length: 223.6mm
- Sound box weight range: 5-6.0 g
- Effective stem mass: 4 g
- Overrun: 6 mm
- Transfer angle: 25 degrees
- Main bearing: Stainless steel
Voice box
- Type: Audio-Technica AT91 moving magnet (MM)
- Pen structure: bonded diamond
- Frequency response: 20 Hz to 20 kHz
- Channel separation: > 18 dB
- Channel balance: 5 dB
- Vertical tracking: Angle 20 degrees
Preamplifier
- Type: Moving magnet (MM)
- Phono Output: 5 mV (1 kHz, 3.54 cm/s)
- Line output: 140 mV (-17 dBV)
- Phono / Line: Switchable
- Supported load impedance: 47 kΩ
- Connector: RCA connector
Voltage: 100--240 V AC / 50-60 Hz
Power consumption: 1.5 W (less than 0.5 W in standby mode)
Dimensions (HxWxD) 14 x 41 x 36cm
Weight: 5.5 kg
